Price list – 1978 Models and Later
Most common parts are in stock
Clear pricing for KitchenAid® stand mixer repair in Rochester, New York.
We service mixers from 1978 to current tilt-head and bowl-lift models. Every repair starts with a full regrease and inspection so we can diagnose the mixer correctly. Many common problems — grinding, slow speeds, leaking grease, or sluggish performance — are fixed with that service alone.
Same-day service is available by appointment at no extra charge.
Most common parts are kept in stock.
Tilt Head mixers
Standard Models (4.5 Qt Bowl)
- K45SS – Solid State
- KSM90 – Ultra Power
- KSM45 / KSM75 – Classic
- KSM88 – Classic Plus
- KSM96 – Ultra Power Plus
- KSM103 / KSM110 – Retailers
Behind every service we provide is a dedicated team of professionals, each bringing their unique expertise and enthusiasm to our business.
Artisan Series (5 Qt Bowl with handle)
- SM150 – Artisan Standard
- KSM152 / KSM155 – Artisan Design
- KSM195 – Artisan Premiu
Next Generation
- KSM50 – Artisan Plus
| Gears and Parts | Price |
|---|---|
| Worm gear | $ 20 |
| Worm-Pinion shaft gear | $ 20 |
| Worm gear Groove pin | $ 5 |
| Worm gear Fiber Shim Washers | $ 5 |
| Worm gear assembly with Bronze Sleeve Bearing | $ 50 |
| Center gear with bevel & Hub gear (set) | $ 60 |
| Center gear with bevel (only) | $ 35 |
| Hub gear (only) | $ 35 |
| Rear-Bearing bracket | $ 30 |
| Rear Gasket for Tilt Head/K5A/K5SS | $ 10 |
| Bearing brackets nuts (2) | $ 5 |
| Front Armature bearing | $ 25 |
| Speed control plate | $ 25 |
| Phase control board | $ 25 |
| Governor | $ 25 |
| Governor Shaft Stud Pin (K5A/K5SS) | $ 10 |
| Carbon brushes - Set | $ 10 |
| Carbon Motor Brush rectangle Insert | $ 10 |
| Carbon Motor Brush outer Caps -set | $ 15 |
| Carbon Motor Brush -inner Cap - round copper insert & spring | $ 15 |
| Lock lever handle | $ 20 |
| Speed control handle | $ 20 |
| Speed control or Lock lever knob | $ 10 |
| Tilt pin set screw | $ 5 |
| Snap rings | $ 5 |
| Dowel pin | $ 5 |
| Spring & washer quick install kit | $ 10 |
| Speed control Coil spring | $ 10 |
| Speed control Flat spring | $ 10 |
| Speed control Plastic push rod | $ 15 |
| Speed control Metal push rod | $ 30 |
| Planetary groove pin | $ 10 |
| In-stock planetary - white - without shafts | $ 35 |
| In-Stock rear cover white | $ 35 |
| Drip ring | $ 20 |
| Bowl Base plate | $ 25 |
| Bowl retaining pin guides -set of 2 -K5ss | $ 25 |
| Bowl Lift- Bowl retainer clip | $ 10 |
| Arm bowl lift assembly | $ 20 |
| Planetary large-ring gear | $ 25 |
| Planetary small gear | $ 15 |
| Planetary small gear spacer washer | $ 5 |
| Planetary small gear retainer clip | $ 5 |
| Center Shaft for Tilt-Head/KSM5/K5SS | $ 25 |
| Planetary Agitator Shaft | $ 20 |
| Replacement flat feet | $ 20 |
| Power cord -1978 + newer | $ 35 |
| Nuts, screws, bolts, pins, washers | $ 5 |
| Motor Armature - 110v | $ 80 |
| Motor Field Assembly -110 v | $ 80 |
| Accessories | |
|---|---|
| Attachment Hub Thumb Screw - black | $ 15 |
| Front Hub cover | $ 20 |
| WHISK | $ 20 |
| BEATER | $ 20 |
| DOUGH HOOK | $ 20 |
| Flex Edge -BEATER | $ 20 |
| Flour funnel - Fits All kitchenaid mixers | $ 15 |
| 5 QT. Stainless Steel Bowl | $ 50 |
Bowl Lift – Pro Series Models (5 Qt, 6 Qt)
-
K5SS – Heavy Duty
-
KG25 / KM25 – Professional HD
-
KV25G – Professional 5 Plus
-
KL26M – Professional 6
- KP26M – Professional 600
- KF26M – Professional 600 Design
| Gears and Parts | Price |
|---|---|
| Worm follower gear | $ 25 |
| Hub gear & Bevel gear (set) | $ 60 |
| Bevel gear (only) | $ 35 |
| Hub gear (only) | $ 35 |
| Worm gear - 60-tooth | $ 45 |
| Thruster bearing (set) | $ 10 |
| Complete Gear Set- includes above 4 gears + thruster bearing | $ 120 |
| Front bearing Sleeve - worm gear | $ 15 |
| Back bearing Sleeve-worm gear | $ 15 |
| Snap ring | $ 5 |
| Snap ring | $ 5 |
| Bowl Lift- Bowl retainer clip | $ 10 |
| Bowl Arm bowl lift guide-hinge | $ 20 |
| Bowl retaining pin guides -set of 2 | $ 25 |
| Transmission housing-metal | $ 80 |
| Speed control board | $ 80 |
| Speed Control knob Replacement | $ 20 |
| Power cord | $ 40 |
| Planetary large-ring gear | $ 30 |
| Planetary small gear | $ 15 |
| Planetary Agitator Shaft | $ 25 |
| Planetary small gear spacer washer | $ 5 |
| Planetary small gear retainer clip | $ 5 |
| In-stock planetary silver,red,black,white | $ 95 |
| Motor shaft seal | $ 10 |
| New motor - 10-tooth - 110v | $ 120 |
| Nuts, screws, bolts, pins, washers | $ 5 |
| Accessories | Price |
|---|---|
| Bowl lift comfort handle | $ 20 |
| WHISK | $ 20 |
| BEATER | $ 20 |
| DOUGH HOOK | $ 20 |
| Flex Edge -BEATER | $ 20 |
| Flour Funnel for Kitchen Aid Mixer | $ 15 |
| 5/6/7 Qt Bowl | $ 75 |
| Flour funnel - Fits All kitchenaid mixers | $ 15 |
Bowl Lift – Pro Line & Commercial (7 Qt, 8 Qt)
- KSM75 – Pro Line Series 7 Qt
- KSM6573 – Professional 6000 HD
- KSM7990 – Commercial 7 Qt NSF
- KSM8990 – Commercial 8 Qt NSF
- KSM80 – Commercial 8 Qt
| Gears and Parts | Price |
|---|---|
| Speed control board Pro 6000 HD & 7/8 Quart | $ 175 |
| Planetary-Pro- White- Silver -Red -stock | $ 95 |
| Planetary- Commercial - Chrome | $ 95 |
| Motor & Transmission | $ 225 |
| Planetary groove pin Pro 7/8 Qt | $ 15 |
| Bowl retaining pin guides -set of 2 | $ 25 |
| Arm bowl lift assembly | $ 20 |
| Bowl Lift- Bowl retainer clip | $ 10 |
| Accessories | Price |
|---|---|
| Bowl Lift- handle knob -black | $ 20 |
| WHISK | $ 25 |
| BEATER | $ 25 |
| DOUGH HOOK | $ 25 |
| Flex Edge -BEATER | $ 25 |
| 5/6/7 Qt Bowl | $ 75 |
| Flour Funnel for Kitchen Aid Mixer | $ 15 |
Bowl Lift – Recent Models (5 Qt, 6 Qt, 7 Qt)
-
KSM55 – Bowl-Lift 5.5 Qt Series
- KSM60 – Bowl-Lift 6 Qt Series
KSM70 – Bowl-Lift 7 Qt Series
| Gears and Parts | Price |
|---|---|
| Planetary groove pin | $ 15 |
| Planetary Silver-Red -stock | $ 110 |
| Speed controller | $ 150 |
| Motor & Transmission | $ 175 |
| Bowl retaining pin guides -set of 2 | $ 25 |
| Bowl Lift- Bowl retainer clip | $ 10 |
| Arm bowl lift assembly | $ 20 |
| Accessories | Price |
|---|---|
| Bowl Lift- handle knob -black | $ 20 |
| WHISK | $ 25 |
| BEATER | $ 25 |
| DOUGH HOOK | $ 25 |
| Flex Edge -BEATER | $ 25 |
| 5/6/7 Qt Bowl | $ 75 |
| Flour funnel - Fits All kitchenaid mixers | $ 15 |
Artisan Mini
| Gears and Parts | Price |
|---|---|
| Base Plate | $ 30 |
| Lock Lever | $ 40 |
| Drip ring | $ 35 |
| Internal Ring Gear | $ 40 |
| Planetary - In Stock | $ 95 |
| Speed Selector | $ 85 |
| Lower Electronic Assembly | $ 95 |
| Power Cord | $ 45 |
| Mini 120V DC Motor | $ 140 |
| Accessories | Price |
|---|---|
| Attachment Hub Thumb Screw | $ 20 |
| Front emblem | $ 25 |
| WHISK | $ 25 |
| BEATER | $ 25 |
| DOUGH HOOK | $ 25 |
| 3.5 qt Bowl | $ 60 |
Parts Notes:
-Non-stock and special-order parts may cost more due to availability and shipping.
-Special-order parts: $25 fee plus the cost of the parts.
-$10 core charge on worm-gear assemblies sold as carry-out parts for DIY repair.
-Pricing is subject to change without notice due to availability, manufacturer adjustments, and tariffs.
Service Notes
-Most mixers can be restored with a degrease and regrease, plus tuning, adjusting, and calibrating. We return your mixer to -smooth, reliable operation so you can get back to mixing your favorite recipes.
-Pre-1978 mixers may be serviced on a case-by-case basis. Fees will be discussed before work begins.
-Mixer-feet replacement is available on tilt-head models and most Pro 5 and Pro 600 bowl-lift mixers. $20 includes parts and labor.